>Solvent-free epoxy floor topcoat
Product:
Ratio: Component/Component B/(weight ratio)
Capacity: Component, Component B
A two-component room temperature curing solvent-free epoxy topcoat is used for coating indoor cement substrates. It cures to a strong, hard and lustrous coating, providing a seamless, smooth surface that is easy to clean. This coating is resistant to many mild chemicals, oils and water, provides good mechanical properties and is easy to maintain. It is an environmentally friendly product commonly used as a thin-coat topcoat for lightly loaded floors and is suitable for a wide range of general colors.
Application Characteristics
Environmentally friendly % solid solvent-free composition
Resistant to wear and scratches, easy to maintain
Resistant to mild chemicals, oil and water
Create a Seamless, smooth and easy-to-clean surface
Creates a dust-proof and glossy coated surface
Available in suitable colors: green gray and yellow, providing universal color
Good stain resistance
Application Method
When applying a coating, surface preparation is the most important step. Remove all residues to expose the base surface. If necessary, clean the construction surface with sufficient water. Use % Wash with dilute hydrochloric acid solution and then rinse with plenty of water. After the surface dries to a saturated state, use cement mortar or our b repair composition to fill all cracks, honeycomb holes, etc., and allow the surface to dry completely before polishing and leveling it. Use a brush or roller to apply the paint to the treated surface. When the surface of the coating film is dry to the touch, accurately mix Part B and A to obtain a uniform concentration of liquid, and scrape the first coat on the primer. , allow the coating to solidify for an hour, then scrape-coat the second coating on the first coating, preferably in a direction perpendicular to the first coating, and so on until the required coating thickness is reached. After the surface of the intermediate coating is completely dry, grind and level it, and accurately mix the A and B components to obtain a uniform concentration liquid. Use a brush or roller to apply the first coat to the intermediate layer, and allow the coating to solidify for an hour. A second coat is applied over the first coat, preferably perpendicular to the first coat. During the curing process of the system, pay attention to prevent the impact from mechanical vibration, water splash, direct sunlight, and heat sources.
Applications
Light-duty industrial manufacturing workshops, warehouses and airports
Mildly corrosive chemical and pharmaceutical plants
Food and dairy plant floors
Clean room laboratories Exhibition hall parking lot floor
Institutional school hospital floor
Commercial environment floor
We can provide customers with floor coatings and undertake epoxy floor project construction.
Solvent-free epoxy floor topcoat