>High solid epoxy floor primer
Product: < b >
Ratio: Component/Component B/(weight ratio)
Capacity: Component, Component B< br/> A two-component room temperature curing high solids modified epoxy primer was developed as a coating application on concrete surfaces before the use of epoxy mid-coat and polyurethane topcoat. It penetrates into the capillaries of concrete as a sealing coating and seals its surface. This can enhance the adhesion between layers, reduce the absorption of subsequent epoxy mid-coat and polyurethane top-coating materials, improve the shielding condition, and strengthen the protective effect. .
Application characteristics
Can penetrate into the capillary tubes of concrete and act as a seal
Can be applied to new and old concrete surfaces
Can improve the strength, wear resistance and impact resistance of the concrete surface
/> Excellent adhesion to epoxy mid-coat or topcoat/polyurethane topcoat and concrete substrate
Environmentally friendly, low- and high-solids economical formula
Can also be applied to metal surface coatings Installation
Application Method
When applying a coating, surface preparation is the most important step. Remove all residues to expose the base surface. If necessary, clean the construction surface with sufficient water. Use % Wash with dilute hydrochloric acid solution and then rinse with sufficient water. After the surface dries to a saturated state, use cement mortar or our b repair composition to fill all cracks, honeycomb holes, etc., and allow the surface to dry completely before polishing and leveling it. Precisely mix components B and B to obtain a uniform concentration liquid. Use a brush or roller to apply it on the treated surface. After the surface of the coating film is dry to the touch, you can directly apply the epoxy mid-coat or ring. Oxygen/polyurethane topcoat for best results.
Scope of application
Industrial manufacturing facilities, warehouses and airports
Chemical and pharmaceutical plants
Outdoor stadiums, swimming pools
Workshops, laboratories, parking lots
Internal and external walls, roads and bridges< br/> Commercial Environment Floor
We can provide customers with floor coatings and undertake epoxy floor project construction.
High solids epoxy floor primer